Company Video

Products & Applications

Construction Machinery

CDM6215

Products & Applications CDM6215 features:

CDM6215 with strong, powerful and high quality engine and advanced negative flow control hydraulic system to achieve the best power matching and minimum cost, guarantee the optimum working efficiency.
CDM6215 is widely used for excavating, handling and finishing of earth or stones to meet the demand of construction sites, factory, municipal engineering and park objects. With the optional bucket, the material handling, surface finishing, ditch excavation and river course cleaning can be achieved, with the optional breaking hammer, the building demolition, road surface repair and rock breaking can be achieved. The structural members are subjected to the repeated analytical calculation to ensure the rigidity and strength which can cope with the rigorous working conditions.

Cummins 6BTAA5.9-C
Cummins high power, high torque and turbo-charging 6-cylinder direct injection engine guarantees the high reliability and durability. The charge air cooling system over the compressed air can enhance the oxygen content upon combustion markedly. The center fuel injection under high injection pressure allows the uniform atomizing of fuel, guarantees the normal combustion and reduces the exhaust gas emission.
Filtering System
The high efficiency dual element air filter ensures the quality of engine air intake. The oil-water separator and two-stage fuel filter will filtrate the fuel many times to ensure the quality of fuel fed to the engine.
Cooling System
The parallel radiator cooling makes cooling effect better and service easier.
Maintenance and Service
The easy maintenance of direct injection engine reduces the cost of maintenance. The global after service of engine enables the sharing of global resources. This will enhance the service efficiency, relieve the customers of worry about the service and ensure the attendance rate of excavator.
Specialist of Engine Management
The engine speed allows 10 adjustable gears through the throttle potentiometer and achieves the precise management over the engine speed through the control of engine throttle by the DC servo motor. The engine allows the auto idling/acceleration function to reduce the fuel consumption. It has a function of touch power enhancement, which can handle the high resistance working condition with ease.
Control Mode
The dual pump two-circuit total power control system adopts the mature and reliable Europe and America technology to control the flow, the proportional solenoid valve regulates the two-stage pressure control of the main overflow valve.
Functions
This machine allows the functions of straight travel, boom/arm confluence, boom/arm holding, swing priority, swing anti-reversing and regeneration of arm cylinder. Each circuit without interference during composite action. Digging of arm and bucket as well as the lifting and swing of boom at the same time during operating, the operations of left and right motors are independent during traveling.
Auxiliary Hydraulic Valve
The main valve is provided with a set of standby valves to facilitate the installation of other accessories such as the breaking hammer.
Filtering System
The hydraulic circuit is equipped with the high quality hydraulic oil filter which can prolong the service life of the hydraulic elements.
Components Layout
The special design of hydraulic system and components location can enhance the system efficiency of the machine. The hydraulic oil tank, main pump and main valve are arranged closely to shorten the connecting lines and consequently reduce the line friction and pressure drop. The radiator is arranged at the right side behind the cab to effectively reduce the noise, hot air and exhaust gas received by the operator.
Pilot System
The pilot pump is independent of main pump and supply oil to the pilot system which guarantee the stable and independent pilot control and facilitate the maintenance.
Monitor
The multi-purpose true color monitor allows the real-time monitoring and display of machine state, engine speed, coolant temperature, oil pressure and fuel level etc.
Power Control Mode
3 power modes of heavy-duty power mode (H mode), saving power mode (S mode) and light-duty power mode (L mode) can switch at will to reduce the system power loss. The combination of 3 modes can reduce the fuel consumption and better meet the different working conditions.
Fault Auto Warning
It allows the fault self-diagnosis auto warning display and fault message save up to 99,000 pieces approximately to facilitate the fault call and inquiry during the maintenance of equipment. There are 3 levels of warning display according to the fault severity.
Engine Overheating Auto Protection
The overheating protection will be active if the coolant temperature exceeds 102℃. Then the engine will not stall while the system will reduce the engine speed. However, if the coolant temperature is too high, the operator should shut down the machine as required and find out the fault causes.
Low Oil Pressure Protection
When oil pressure below the standard value, the oil pressure switch will be closed, the text warning will display for 3s and then the engine will slow down to low idle speed. In such a case, the operator should shut down the machine as required.
Maintenance Auto Remind
The monitor will periodically remind the operator of changing the engine oil, grease and filter element at the set interval to support the routine service.
Main frame
The reasonable layout of robust main frame optimizes the utilization of steels.
Undercarriage
The X-shaped undercarriage with heavy-duty box structure is subjected to the repeated finite element analytical calculation and enhance the overall rigidity, strength and torsional resistance. Undercarriage is welded from the low alloy structural steel plates with overall process quality control. The critical welds are fully subjected to fault detection and stress test to ensure the product quality.
Track
There are ribs and crawler cradle in the middle of the track links. Using m-type seals to ensure the lubricating effect of the pin and pin suites. Extending the track working life effectively.
Travel Device
The drive unit employs the imported motors of high quality and the drive wheel adopts high frequency heating overall hardening process to enable the excellent wear resistance of the external gear rim.
Idler Cushion
The idler cushion with high quality sealing elements effectively guarantee the high pressure sealing inside the cylinder block, the springs are subjected to the special heat treatment to allow the excellent fatigue resistance.
Cab Shock Absorption System
The cab shell is installed to the platform through the cushioning materials consisting of the silicon oil and rubber to relieve the vibration, reduce the noise and guarantee the operation comfort.
Cab External Structure
The roof and both sides of cab are reinforced by the steel pipes to enhance the fatigue resistance and damping capacity. The falling object protection structure is bolted to the cab front directly to facilitate removal and consequently enable the machine to adapt to the working conditions and meet the specified safety requirements.
Windows
The glass is clung to the cab directly without frame to enlarge the visual field. The windows allow free adjustment to open/close the front and upper window and windshield, besides, the front glass can be set to the roof above the operator.
Front Wiper
The wiper located in front of cab pillar enlarges the operator’s field of view, it allows the continuous and intermittent operation modes.
Safe and Comfortable Cab
The left/right pillar type reinforced cab complies with 15012117 - 2: 2008 and the optional cab FOPS conforms to 15010262: 1998 to ensure the operator's safety. The 2.7m3 cab space makes the excavator operation comfortable. The reasonable layout of control elements inside the cab allows easy operation.
Standard Cab Equipment
The cab inside includes the cigar lighter, ash tray, cup holder, coat hook, cubbyhole and storage rack, which enhance the operation comfort.
A/C System
The high performance and healthy A/C allows the air circulate. Concise control panel and easy press key operation, multi-direction A/C air outlet allowing fast regulation of cab inside temperature and fast defrosting. The fault self-diagnostics mode facilitates the A/C maintenance.
Deluxe Seat
The comfortable suspension type seat is provided with a hydraulic damper, the wide seatback allows the waist support and the curve profile enables comfortable riding, the double slide track multi-way multi-step regulation enables different operators to find the best posture, the wide pedal space allows the free body stretching and relieves the operator from the long time operation fatigue.
Safety Lock Joystick
The hydraulic safety lock joystick is located at the outside of center left armrest box in the cab. The machine control is active only when the joystick is in ON position, which can prevent the wrong operation in an effective way.
Control Lever
The reasonable design of control lever saves the operating effort by the lever principle, the ergonomic design enables the operator to maintain the natural wrist and arm posture. The moderate joystick stroke relieves the degree of fatigue and ensures the accurate control.
Switch Control Panel
The control panel on the left/right pilot box is in concise and esthetic layout and the operation of keystroke is easy.
Boom and Arm
To cope with high load during operation, the design & development team of LONKING adopts lots of up-to-date design ideas, preserves the higher safety factor, employs finite element analysis, calculation and optimum design to finish the development of boom and arm and selects the high strength low alloy structural steels for the boom and arm fabrication.
Pin Shaft
The pin shaft is the core element for the connection of the working equipment. LONKING chooses the professional pin shaft suppliers and subject the pin shafts to the strict fault detection to ensure the quality. The pin shaft of LONKING excavators has thick chrome plating coat and high surface finish. The special treatment enables the extremely high wear resistance and corrosion resistance.
Bucket
The bucket body is made of low alloy and high tenacity materials and the external structure is made of high strength and wear-resistant steels, which constitute the entire reinforced bucket. This excavator provides different bucket options to meet different working demands.
Easy Maintenance and Service
The design and layout of CDM6215 consider to providing convenience for maintenance personnel. Most maintenance locations can be accessed from the ground level to enable the fast and high efficiency maintenance. 3 side doors can be opened during the routine inspection and maintenance and each service point is within the easy reach. The maintenance points are clearly identified, easy to operate. The electrical elements are centralized in the electromechanical control box in the cab to facilitate the maintenance.
Long Maintenance and Service Cycle
The maintenance and service cycle has been prolonged to reduce the maintenance parts collection and enhance the availability.

SpecificationsCDM6215
EngineModelCummins 6BTAA5.9-C (Tier 2,standard)
Rated power112kW (150hp) /1950 rpm
Max. torque614 N.m/1500 rpm
Bore × Stroke102mm×120mm
Displacement 5.9 L
CommentMaintain the rated power at 2300m elevation.
Operating weightSummaryOperating weight:21200kg
The operating weight includes the weight of 5675 mm standard boom,2920 mm standard arm,0.9m3 standard bucket,
600 mm track shoes, lubricating oil, coolant, the full diesel oil tank and the rest standard configuration units.
Ground pressure51 kPa
Fluid capacityFuel tank380 L
Cooling system23 L
Engine oil18 L
Swing drive unit3.8 L
Traveling gear 2×3.3 L
Hydraulic oil tank280 L
Swing mechanismHigh torque plunger motor and 2-stage planetary reducer drive. Brake inside loading motor is applied by spring 
and released by hydraulic unit. The automatic braking is available when the swing control lever is in neutral position.
Swing speed :12.1 rpm
Travel driveSummaryThe integrated 2-speed plunger hydraulic motor and reducer drive, motor and hydraulic pipeline are arranged inside 
the  track frame to prevent the damage caused by the rugged road surface; The motor inside is provided with the 
service brake and shock absorption valve to ensure the smooth running and stop and the reliable braking.
Taveling speed3.0 - 5.2 km/h
Gradeability35°(70%)
Maximum Traction224 kN
Traveling mechanismStandard track shoe width600 mm
No. of track shoe45 (each side)
No. of carrier rollers2 (each side)
No. of track rollers7 (each side)
Hydraulic systemMain pumpDuplex axial variable plunger pump
Pilot pumpgear pump (integrated in main pump)
Max. flow of system2×208 L/min
Max. pressure of equipment31.3 MPa
Max. pilot pressure3.9 MPa
Operating equipmentEach machine action is under the pilot control. The right lever controls the motion of boom and bucket 
while the left lever controls the arm motion and upper structure swing. The foot pilot valve is provided 
with the lever joystick to control the machine traveling or turning by the foot or lever. The traveling gear 
shift adopts the solenoid switch control. 
Electrical systemSystem voltage:24 V
Battery:12 V,120 A×2

Transport Size
The following sizes approximate to that of the equipment of standard configuration.


Working Device typeStandard
Boom Length (mm)5675
Arm Length (mm)2920
a Transport length(mm)9503
b Total transport height(mm)3200
c Tumblers distance (mm)3265
d Tail slewing radius(mm)2840
e Counterweight ground clearance(mm)1064
f Track gauge(mm)2200
g Total transport width(mm)2800
h Upper structure width(mm)2740
i Standard track shoe width(mm)600
J Min. ground clearance(mm)478

Operating Range

The following sizes approximate tothat of the equipment of standard configuration.


Working Device typeStandard
Boom Length (mm)5675
Arm Length (mm)2920
a   Max. digging radius(mm):9879
b Max. digging depth(mm):6570
c Max. digging height(mm):9292
d Max. dumping height(mm):6651
e Max. digging radius on ground(mm):9738
Max. bucket breakout force-ISO(kN):158
Max. arm breakout force-ISO(kN):105
Standard Equipment
The following equipment items are part of the whole standard equipment of CDM6215. In addition,
 the standard configuration will change along with the product modification. For more information, 
contact the local LONKING agent.
50 A alternatorAerial and harness (excluding radio speaker)
Platform working lamp (1)Ash tray and cigar lighter
Boom working lamps (2)Retractable seat belt (2" width)
Cummins engineCup holder
Radial seal air filterA/C system allowing fast defrosting
Air prefilterHydraulic safety lock joystick
Oil-water separatorRadio
Fuel filterFile pocket
Rippled wall radiator with cleaning spaceHat-and-coat hook
High-volume fuel tankInterior lighting equipment
Auxiliary hydraulic valve (1)Double stereo speaker
Auto swing parking brakeOpenable skylight
Boom/Arm holding control functionWiper and washer
CounterweightCab positive pressure filtration and ventilation system
Gate lock and cover lockRear window (escape exit)
A/C stationary condenserEscape hammer
Arm re-activation circuitWashable rubber floor mat
Boom/Arm confluenceFire extinguisher
Straight travelling hydraulic circuitColor graphic display
Double speed travelEconomic mode selection
Front idler and idler cushionDate and time display
Trailer ring on base frameMachine state display
Chain guard rackWorking hour display, maintenance remind
Adjustable seat armrestCurrent engine speed display
Suspension type adjustable seatWarning message

Optional Equipment
The optional equipment may be different from this manual. For more information, contact the local LONKING agent. 
BucketOperating consoleUndercarriageAuxiliary hydraulic unit and pipeline
General bucket Heavy-duty bucketWorking warning lamp700mm triple grouser shoesBreaking hammer pipeline
Loose material bucketCab roof protecting net800mm triple grouser shoesHydraulic breaking hammer
 Cab front protecting netTravel warning device